CBS-VX APE 5 HP Piston Compressor, Three Phase Explosion Proof
SKU: XV-580531 APE-en
CBS-VX APE 5 HP explosion proof compressor — designed for environments with potentially explosive atmospheres. APE-certified motor and pressure switch (spark-proof). Cast iron XV-531 pump head, 22.38 CFM at 175 psi with 500 liter tank. For chemical industry, petrochemical, mining, gas plants, and any area classified as an explosion risk zone.
| Motor | 5 HP / 3.7 kW — APE |
| Air output | 22.38 CFM / 633 L/min |
| Nominal pressure | 175 psi (12 bar) |
| Tank | 500 L (132 gal) — NOM-020-STPS compliant |
| Pressure switch | Explosion proof |
| Warranty | 2 years pump head + 1 year motor + 1 year accessories |
CBS-VX APE 5 HP Explosion-Proof Piston Compressor
The CBS-VX APE 5 HP compressor is designed to operate in hazardous classified environments where flammable gases, vapors, or dust are present. Equipped with an explosion-proof motor, pressure switch, and accessories certified Class I, Division 1 & 2, with high-resistance epoxy paint finish, ensuring safe operation in refineries, petrochemical plants, fuel storage terminals, industrial paint facilities, and solvent processing areas.
Mechanically identical to the CBS XV series, it uses the cast iron XV-531 pump head in two-stage configuration to deliver 22.10 CFM at 175 psi. The low 550 RPM extends service life and minimizes heat generation — a critical factor in explosive environments.
Performance features
- Explosion-proof motor: Class I, Division 1 & 2 certified. Sealed housing that prevents ignition of flammable gases or vapors in the external environment. 5 HP / 3.7 kW, Three-Phase (220V/440V · 60 Hz).
- Explosion-proof pressure switch: Pressure control with certified enclosure, eliminating any spark source in the control circuit.
- Explosion-proof accessories: All electrical and control components certified Class I, Division 1 & 2.
- Epoxy paint finish: High-resistance coating on the entire unit for maximum corrosion protection in aggressive environments.
- XV-531 Pump Head: Cast iron body with nodular iron crankshaft. High-strength aluminum pistons and connecting rods for maximum durability and heat dissipation.
- Low RPM (550): Reduced-speed operation that minimizes heat generation and mechanical wear — especially important in classified areas.
- Belt drive: Pulley and belt system providing smooth operation without mechanical sparks.
- Conical high-load bearings: Support radial and axial crankshaft forces, ensuring smooth operation for thousands of hours.
- Imported steel reed valves: High-quality steel, designed for precise opening and closing with minimal volumetric efficiency loss.
- Air receiver tank 132 gal: NOM-020-STPS compliant, with 175 psig safety valve, check valve, manual drain, and ball valve outlet.
- Tiered warranty: 2 years on pump head, 1 year on motor, and 1 year on accessories — factory-direct.
| Model | CBS-VX APE 5 HP |
|---|---|
| Type | Explosion-proof piston compressor |
| Configuration | Two-stage |
| Orientation | Vertical |
| Pump Head | XV-531 |
| Motor | 5 HP / 3.7 kW — Explosion-proof (Class I, Div. 1 & 2) |
| Pressure Switch | Explosion-proof (Class I, Div. 1 & 2) |
| Accessories | Explosion-proof (Class I, Div. 1 & 2) |
| Finish | High-resistance epoxy paint |
| Voltage | Three-Phase (220V/440V · 60 Hz) |
| Air Output | 22.10 CFM / 626 L/min |
| Nominal Pressure | 175 psi (12 bar) |
| Pump Head RPM | 550 RPM |
| Tank | 132 gal (500 L) — Vertical — NOM-020-STPS compliant |
| Drive | Belt-driven (pulley and belt) |
| Lubrication | SAE 40 monograde oil |
| Pump Head Construction | Cast iron body, nodular iron crankshaft, aluminum pistons and connecting rods |
| Bearings | Conical high-load bearings |
| Valves | Imported steel reed valves |
| Approx. Weight | 551 lb (250 kg) |
| Includes | Safety valve 175 psig, check valve, air filter, ball valve outlet |
| Warranty | 2 years pump head + 1 year motor + 1 year accessories |
| Volumen de salida | 22.38 CFM / 633 L/min |
| Presión Nominal | 175 psi (12 bar) |
Important notes
- Warning: The air supplied by this equipment is not breathable.
- Classification: Motor and pressure switch certified for Class I, Division 1 & 2 classified areas. Installation must comply with NEC/NFPA 70 and applicable local codes.
- We reserve the right to make technical modifications to the equipment without prior notice.
- Product images are for illustrative purposes only.
- Pressure and airflow values in spec sheets are calculated at mean sea level (MSL values).

Need expert advice?
We're ready to help, no strings attached. Contact us!
Leave Your Details
An advisor will contact you to review your project and recommend the best solution.
By submitting you agree to be contacted. Privacy Policy.